If you’re new to dance music, the vocabulary can be harder than the music. Here are the terms you’ll keep running into in track titles, tracklists and comment sections, defined in a sentence or two each. Genres aren’t covered here. For house, techno, trance and the rest, see my plain guide to EDM subgenres.
Tempo and rhythm
- BPM. Beats per minute, the speed of a track. A lot of house sits between about 120 and 130 BPM, and drum and bass runs far faster, around 170.
- Four-on-the-floor. A kick drum on every beat of a four-beat bar. Count “one, two, three, four” along with the thump and you’ve found it. Disco made it standard.
- Bar and phrase. A bar is four beats. Dance tracks are mostly built in blocks of 8, 16 or 32 bars, which is why a change so often lands exactly where you expect it.
- Offbeat. The point halfway between two kicks. An open hi-hat or a bass note placed there is what gives house and trance their bounce.
The parts of a track
- Intro and outro. The opening and closing stretches, usually drums and little else, so a DJ can blend one track into the next.
- Breakdown. The section where the drums fall away and the chords, melody or vocal take over. In trance and progressive house it’s often where the main theme is stated most clearly.
- Build. Also called the build-up. The stretch that raises tension before the drop, typically with faster and faster snare hits, rising noise and the kick drum removed.
- Riser. A sound that climbs in pitch or volume through a build.
- Drop. The moment the full beat and bass return after a build. The main hook usually lands here. The lead riff in Avicii’s “Levels” is a drop most people know even if they don’t know the word.
- Hook. The part you leave humming, whether it’s a vocal line or a synth melody.
How those sections play off each other matters more than any one of them, and I’ve written about that in why contrast makes a drop hit harder.
Sounds and production terms
- Bassline. The repeating low-pitched part that works with the kick. Sub bass is the lowest layer of it, felt in the chest more than heard.
- Sidechain. Short for sidechain compression. The bass or chords dip in volume each time the kick hits, which makes room for the kick and creates a pumping feel. Eric Prydz’s “Call on Me” (2004) is a well-known example of the effect pushed hard.
- Supersaw. A thick, bright synth sound made from several slightly detuned sawtooth waves stacked together. The name comes from the Super Saw waveform on Roland’s JP-8000 synthesizer of the late 1990s, and it became the classic trance lead.
- Lead, pad, pluck and arp. A lead carries the main melody. A pad is a soft, sustained chord sound. A pluck is a short note with a sharp start. An arp (arpeggio) plays the notes of a chord one at a time in a repeating pattern.
- Topline. The vocal melody and lyrics written over an instrumental. The person who writes it is a topliner.
- Stems. The separate parts of a finished track, such as drums, bass and vocals, exported as individual audio files for remixing or mixing.
Versions of a track
- Original mix. The producer’s own main version.
- Extended mix. The full-length version with a DJ-friendly intro and outro. I’ve explained why the extended mix still matters in its own post.
- Radio edit. A shortened version, often around three minutes, that gets to the hook quickly.
- Remix. A new version made by another producer, normally commissioned by the artist or label and built from the stems.
- Bootleg. An unofficial remix, made without permission from whoever owns the original.
- Edit. A rearrangement of an existing recording, for example a longer intro or a section cut out, without new production on top.
- Mashup. Two or more existing tracks combined, most often the vocal of one over the instrumental of another.
- VIP. A producer’s own alternate version of their track, traditionally made for their own sets.
- Dub, instrumental and acapella. A dub strips out most of the vocal, an instrumental has none, and an acapella is the vocal by itself.
DJ and tracklist terms
- Set. A DJ’s continuous performance, from the first track to the last.
- Beatmatching. Adjusting the speed of two tracks so their beats line up and one can be mixed into the other.
- B2B. Back-to-back. Two or more DJs share one set and take turns choosing tracks. Ultra Miami’s 2025 lineup, for example, billed Anyma b2b Solomun.
- ID. In a tracklist, a track nobody has identified yet, usually because it’s unreleased. “ID – ID” means neither the artist nor the title is known.
- White label. A vinyl pressing with a blank label, historically used to test or promote a track before its official release.
- Residency. A regular booking at one club or venue across a season.
That covers most of what you’ll meet in a tracklist or a release page. If a term here still feels abstract, the fastest fix is to put on an extended mix and listen for the intro, the breakdown, the build and the drop in that order.
